I can understand why this might be frustrating. When it comes to installing the Curt Spectrum # C51170 in your 2019 Toyota Tacoma, you can hardwire the controller in to the vehicle and no additional parts or wiring are required. For this reason, the Curt Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In # C51455 adapter isn't a required part to complete installation; it's more of a convenience to use than a required part. These adapters are also vehicle specific, which... view full answer...
Yes, we do carry a 3-crossbar version of the Thule TracRac TracVan ES Van Ladder Rack # TH29613XT. For the 3-bar version, that is the Thule TracRac TracVan Van Ladder Rack # TH29056XT.
In order to confirm the fitment of the TracVan ladder rack, I would be happy to provide you the confirmation if you provide the year/make/model of your vehicle. view full answer...
The Dutton-Lainson Pull Pin, Easy Swivel Trailer Jack, part # DL22689, comes with the weld-on bracket and the retaining ring that connects the jack to the weld-on bracket and allows the jack to swivel. view full answer...
RoadMaster Base Plate kit, part # 524407-1, only includes the base plates and corresponding installation hardware. It does not include a tow bar or any wiring. You would need to purchase a tow bar separately like part # RM-020.
Installing part # 524407-1 will require trimming the lower grille on a stock bumper. It would be safe to assume that it would also require trimming on any aftermarket, factory option or dealer installed body package, but I do not know how much trimming or where... view full answer...
The C-Shaped pins are used to lock the snap-up brackets in place. I have included a link to a video on a weight distribution assembly and install. Go to the 4:50 time mark and you will see how the C-Shaped pins are used. view full answer...
The Go Power Solar Elite Charging System - 380 Watt Solar Panels - 2,000 Watt Inverter Charger # 34282184 is packaged with a 30 amp PWM controller straight from the manufacturer, Go Power. The PWM controller will do the job, the MPPT style controllers are just more efficient once you start getting into the 150watt and higher range. To get the Go Power MPPT Solar Charge Controller # GP54FR we previously talked about you would have to purchase it separately. view full answer...
The Anti-Rattle Fasteners for License Plate Frames # CR81400 that you referenced is designed for license plates that install using only two bolts. The washers go on either side of the plate that is secured with the two bolts to prevent the rattle. view full answer...
The Solera 18" Projection Window Awning Roller part # LCV000334978 does come with the awning rail but you will still need the Solera 18" Projection Window Awning Support Arms for RVs part # LCV000334750 and the White Butyl Tape part # CAM25013 in order to complete your install. view full answer...
The Progressive Dynamics panel part # PD4590K18LS8 does not have a transfer switch built into it so you would need to wire one in like with the Furrion part # F50ATS. view full answer...
The Yates Keel Roller For Boat Trailers, # YR18244-165EC, does not come with the steel shaft, but we do carry a steel shaft that will fit this keel roller.
You will want to pick up the 19 inch long x 5/8 inch diameter roller shaft, # 107-30A. view full answer...
The Husky Liners Auto Floor Mats, part # HL51033 would include the front mats only. For the rear seats, use part # HL52023. For the second and third rows, you would need two sets of the # HL52023.
You can see the entire selection of mats available for your 2005 Tahoe by clicking the provided link. view full answer...
Yes, the Rhino-Rack Steel Mesh, Roof Mounted Cargo Tray, # RPBS-S280, comes with the universal U-bolt hardware kit that allows this tray to mount to most roof-rack systems.
If you have a Rhino-Rack roof rack on your vehicle with the heavy-duty crossbars, then you will want to pick up the Heavy-duty Crossbar Fit Kit, # RUBK, to secure this tray on the larger crossbars.
You may also be interested in the Rhino-Rack Tie-Down Straps, # RTD3, to secure any cargo you plan on carrying on this... view full answer...
Yes, the Curt Weight Distribution System, # C17322, comes with everything you will need including the shank and a ball. I have included a link to the installation instructions for you.
You will want to make sure that this is the best system for your needs. Weight distribution systems should be selected based on the tongue weight of the trailer plus the weight of anything loaded behind the rear axle of the towing vehicle.
This system has a tongue weight capacity range of 800 to 1,000... view full answer...
The Replacement Rubber Shim for TracRac TracONE Fixed Truck Bed Ladder Racks # TARX-11034-3 is a quantity of 1. This is a 16" long and 2-1/2" wide rubber shim that fits all TracRac TracONE systems. view full answer...
If you're ordering an access door like the Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - Chrome # UF48-979010 or the Ultra-Fab Universal Access Door for Trailers and RVs - 5" x 5" Opening - White # UF48-979009 then you'll have to order the Camco Cam Lock - Straight or Offset - Thumb Operated - 7/8" Thick
Item # CAM44323 separately to replace the keyed locks that come with the door. view full answer...
The Dutton-Lainson Hand Winch - Worm Gear - Hex Drive - 2,000 lbs # DL11004 accepts a 2" wide x 20' long winch strap which is sold separately. For a winch strap that fits this hand winch, I recommend the Hand Winch Strap with Safety Hook, 2" Wide x 20' Long - 4,000 lbs. # DL24242.
This strap will fit the # DL11004 and has a breaking strength of 4,000 lbs. It is designed to be used with winches with a capacity up to 2,600 lbs, and includes the mounting hardware.
I have attached some video... view full answer...
Yes. On the Westin Diamondstep Replacement Bumper, # 71000-94400, for a 1987 Toyota Pickup, there are mounting points for a license plate. The are difficult to see in the picture on the product page because of the chrome plated finish on the bumper, but they are there. You will not need to drill into the bumper or use a relocation kit.
We have several other bumper options for your truck. I have included a link to them for you to view. You can see the license plate mounting locations more... view full answer...
Even though we do not carry a replacement hardware kit for this Westin Ultimate Bull Bar with Skid Plate, part # 32-1695, I can tell you what the contents of a hardware kit would most likely include.
I pulled the installation instructions for this product and found that you would need the following to install this product on your 2007 Ford F150:
2 BRACKET, PASSENGER AND DRIVER
4 M12- 1.75 X 30MM HEX HEAD BOLT
8 M12 FLAT WASHER
4 M12 LOCK WASHER
4 M12 HEX NUT
4 M12-1.25 X 30MM HEX HEAD... view full answer...